When you remove the AMD-Raid Bottom Device driver (see 5 above), you have to check the box to delete the driver files. I am concerned there is something else wrong (either with Mobo, software, or user error) since there seem to be several other people with similar issues and I would prefer not to lose the data if possible.ĭrive in question: M.2 XPG SX8200 Pro 2TBĮdit - Yep, I am dumb. The drive is still under warranty, so I reached out to ADATA, but their solution is an RMA. Make sure that the SATA connector on the board does. I can't check drive firmware since it isn't detected from Windows When the SSD is not properly connected, it may not be detected.I deleted AMD-Raid Bottom Device from storage controllers in device manager (it came back though).I deleted the IDE ATA/ATAPI controller driver from device manager.I updated the drive controller drivers for the motherboard.I don't have another computer to test it in. Also, just as for their other SSDs, you can download Adatas SSD toolbox to. I tried moving it to another M.2 slot, with the same result and then back again. It features LDPC ECC Technology as well as a RAID Engine & Data Shaping to.The odd thing to me is it shows up in BIOS and it passed the self-tests available from BIOS. Official Filename ADATASSDToolBoxSetup.4.1.4.zip Filesize 5. The drive wasn't showing in File Explorer, Disk Management, DiskPart, or Device Manager. At reboot in bios, I didnt notice Asus board switched itself Storage Config parameter from RAID to IDE (for the new sata disk connected & the other drives. It has previously worked without issues for the 10 months since I purchased it, both in this build for 2 months, and my previous Intel build. I recently returned from a week-long trip and when I booted my pc up, my M.2 XPG SX8200 Pro was no longer showing up in Windows.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |